Hardware
Here's the new main rack at likk.net from Okamura. It used to
look like this. |
Comunications
Equipment
Top shelf: (left) Cisco 700series ISDN router (my employer's equipment,
not connected to likk.net)
(right, top) Mucho ST ISDN router connected to OCN
Economy permanent 128kbps service.
(right, bottom) MN128-SOHO ISDN router connected to dialup ISDN. Two
analog ports run the phones, incoming data connections can be accepted
from ISDN or mobile PHS (PIAFS32).
Bottom shelf: (left) 5 port 10BaseT hub, PCI EH5058 (same network as
the Cisco, also not connected to likk.net)
(right) CentreCOM MR820TR 8 port 10baseT hub, connected to the likk.net
10base2 (soon to migrate to FOIRL) backbone. |
Desktop
workstation:
Sun SPARCstation 20/152 (turakina), Solaris 2.6, 256M, dual Hypersparc
150Mhz 512k cache, 2x2.1G, Plextor 12/20 CDROM, dual SX 24 bit graphics
each with 8M VSIMM, PCMCIA adaptor, Performance Technologies
wide SCSI adapter. |
Server
workstations:
Bottom: Sun SPARCstation 5/70 (hanage) SunOS 4.1.4, 70Mhz MicroSparc,
96M, 1G + 2.1G, DNS, secondary mail
exchanger, fileserver, external 2x2.1G 7200rpm drives (top right disk pack)
striped RAID 0.
Second Bottom: Sun SPARCstation 10/412 (tengu) Solaris 2.5.1, dual
SuperSparc 40Mhz, 1M cache, 128M, 4G + 1G internal, 2.1G external (top
left disk pack), external Plextor CD-R drive (second
top left), external DDS2 DAT drive (second top right),
DNS, primary mail exchanger,
web server. |
|
SunSPARCstation
LX (bento) Solaris 2.5.1, 50Mhz MicroSparc, 64M, 1G, 2M VSIMM (1280x1024),
Umax scanner attached to SCSI bus, Canon bubblejet attached to printer
port.
|
UMAX
Astra 1200S, 600dpi colour scanner. Attached to the SCSI port on bento.
Scanning software, SANE plugin for The Gimp. |
Canon
BJC-4300J (BJC-430 to the rest of the world) colour bubblejet printer.
Attached to parallel port on bento. Print queue managed by LprNg
and Ghostscript. |
|